Measuring operational losses and improving factory performance
A German precision engineering business improved reported overall equipment effectiveness from approximately 63.8% to 67.1% during a 12-month improvement programme. Members of today’s Gambit Reign team carried out the engagement in previous consultancy roles, helping the client establish an operational baseline, identify losses and support improvements in changeovers, maintenance, material use and energy consumption.
Key figures
- Reported OEE over 12 months
- 63.8% → 67.1%
- Reported OEE improvement
- +3.3 pp
- Reported programme cost and investment
- €356k
Figures are approximate and reflect the project team’s account of the engagement.
The business
The privately owned manufacturer operated 14 CNC machining centres across two shifts and employed approximately 85 people. The figures presented here are rounded management figures reported for the engagement. FY2024 revenue was approximately €9.2 million. Materials represented approximately 45% of revenue, while energy expenditure had risen from 4.2% of revenue in FY2022 to 5.5% in FY2024.
Management was considering whether margin pressure should be accepted as a lasting consequence of higher input costs. The business had informal downtime records but no consistent OEE measurement across the operation. It needed a clearer view of how much production capacity was being lost and which improvements justified investment.
The mandate
The engagement covered operational measurement, loss analysis, improvement design, training and implementation support. The client retained responsibility for delivering the changes, supplying operating information and allocating resources.
Advisory work took place in early 2025. The programme’s first-year implementation period ran from February 2025 to January 2026. Further performance monitoring was planned through January 2027.
Establishing the baseline
The team worked with shift supervisors over four weeks to record downtime, speed losses and quality defects using consistent definitions. The reported baseline comprised 78.0% availability, 87.0% performance and 94.0% quality, giving approximately 63.8% OEE.
Availability represented the largest measured loss category: approximately 22% of scheduled production time. That category required examination of stoppages and changeovers to distinguish equipment reliability problems from other interruptions. Performance and quality losses were measured separately.
The assessment gave management a more specific basis for action. It identified operational losses that could be investigated alongside the effects of material and energy prices, and created a way to monitor whether changes were improving production.
The improvement programme
The work covered four areas:
- Changeovers. The team reviewed changeover sequences, separated tasks requiring stopped machinery from activities that could be prepared in advance, and supported revised procedures and tooling arrangements.
- Equipment reliability. Maintenance work focused on significant failure modes, operator checks, critical spares and root-cause analysis.
- Material use. Existing material-waste activity formed part of the programme and its reported first-year benefit assessment.
- Energy use. The programme included compressed-air leak work, motor-efficiency measures and operating-setting changes.
Operators and supervisors received training in measurement, changeover practice, daily maintenance and defect escalation. Two production managers were prepared to deliver training internally. Weekly performance reporting supported implementation and follow-through.
The original proposal was approximately €340,000. A revised programme was approved at approximately €210,000. Reported total programme cost and investment subsequently reached approximately €356,000, including €146,000 of additional capital expenditure associated with the energy work. The scope and spending changes are important context when assessing the programme’s financial outcome.
The operating result
Reported Year 1 OEE reached approximately 67.1%, an improvement of 3.3 percentage points. Availability rose from 78.0% to 81.3%, performance from 87.0% to 87.5%, and quality from 94.0% to 94.3%.
Availability improvement accounted for approximately 2.7 percentage points of the OEE increase. Performance contributed approximately 0.4 points and quality approximately 0.2 points. The result remained below the original 68.3% OEE target, with reliability improvement progressing more slowly than planned.
The client reported an improvement in equipment effectiveness. Translating that improvement into financial value requires a separate assessment of sellable demand, bottlenecks, recovered production hours, avoidable costs and investment timing.
The financial assessment
The reported Year 1 gross-benefit estimate was approximately €383,000, comprising approximately €95,000 from changeovers, €143,000 from maintenance, €84,000 from material waste and €61,000 from energy. These are management benefit estimates. The available model does not fully reconcile the changeover and maintenance valuations with recovered production hours or demonstrate that those benefits are non-overlapping. The combined figure therefore remains an estimate requiring reconciliation; it is not a verified savings or profit result.
Applying the programme model’s 80% flow-through assumption to the reported gross estimate produces approximately €306,000. Comparing that with the €356,000 programme cost and investment figure leaves a modelled first-year balance of approximately minus €50,000. This calculation includes capital expenditure and production opportunity cost, so it does not establish an accounting net-profit loss.
Using the same benefit estimate and flow-through assumption, simple annualised payback is approximately 14 months. This remains a conditional run-rate calculation, not an observed payback date. Establishing actual cash payback would require reconciled benefits and a dated cash-flow record. Energy benefits also require separation of operational changes from tariff movements, production changes and weather effects.
What similar manufacturers can take from this
A consistent operational baseline helps management decide where to intervene and whether a programme is delivering. Improvement priorities should reflect the plant’s production constraint, practical recoverability, demand and cost of implementation.
This engagement also illustrates why operating results and financial appraisal should be reviewed together. The client reported higher OEE, while total programme cost and investment exceeded the approved budget. A sound investment assessment needs both the operating evidence and a reconciled benefit model, with capital costs, ongoing expenses and implementation timing treated consistently.
Discuss an operational improvement assessment with Gambit Reign.
Gambit Reign supports manufacturers with operational baselines, loss analysis and improvement programme design.
